Loading Labels

1. Press the form-feed button to eject the labels that protected the printer during shipment.

2. Open the top cover and remove any packing material inside the label compartment.
Remove the label spool from inside the cover.

3. Hold the spool spindle in your hand and place the label roll on the spindle so that the labels feed from underneath and the left edge of the label roll is flush against the side of the spool.

4. Place the spool guide onto the right side of the spool and press the guide tightly against the side of the label roll, leaving no gap between the roll and the spool.
Insert the label spool into the slot in the printer cover with the labels extending from underneath the roll.

5. Align the left edge of the label feed slot and insert the label into the slot. The printer feeds the labels, stopping at the beginning of the first label. If the printer does not feed the labels, make sure the first label is fully inserted and then press the form-feed button.

6. Close the top cover.